Key Facts

• Measurement range: DC to 100 kHz
• Resolution: 1 μV, 100 nA, 1 mΩ, 1 pF, 1 Hz, 0.1 °C/F
• Basic accuracy: 0.015 % (DC)
• 5¾-digit display (480 000 counts)
• Simultaneous display of three measurement functions, e.g. DC + AC + statistics
• Measurement rate: up to 200 values/s
• Measurement functions: V (DC), I (DC), V (AC), I (AC), frequency, DC power, resistance (two and fourwire), temperature (PT100/PT500/PT1000), capacitance, diode and continuity test
• Mathematic functions: limit testing, min./max., average, offset, DC power, dB, dBm
• Data logging to internal memory or USB flash drive in CSV format
• Interfaces: USB-TMC/-VCP, Ethernet, LXI, IEEE-488 (GPIB)
• SCPI commands largely compatible with Agilent 34410A (HMC8012-G)
• HMC8012-G: HMC8012 incl. IEEE-488 (GPIB) interface

Key Facts

• 4¾-digit display with 50 000 counts
• Basic accuracy: 0.05 %
• Max. resolution: 10 µV, 0.01 dBm, 10 nA, 10 mΩ, 0.1 °C
• Offset function/relative value measurement
• RS-232 interface and software included

Key Facts

• Measurement range: 20 Hz to 200 kHz (69 steps)
• Basic accuracy: 0.05 %
• Measurement rate: up to 12 values/s
• Automatic or manual selection of circuit type (serial, parallel)
• Measurement functions: L, C, R, |Z|, X, |Y|, G, B, D, Q, Φ, ∆, M, N
• Transformer measurement: mutual inductance and ratio
• Internal: 0 V to 5 V/0 mA to 200 mA (resolution: 10 mV/1 mA)
• External: 0 V to 40 V (bias voltage only)
• RS-232/USB dual interface for remote control, optionally IEEE-488 (GPIB)
• Fanless design

Key Facts

• Measurement functions: L, C, R, Θ, Q/D, |Z|
• Basic accuracy: 0.2  %
• Five measurement frequencies: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 25 kHz
• Max. resolution: 0.001 Ω, 0.001 pF, 0.01 µH
• Two- and four-wire measurement, parallel and serial mode

Key Facts

• Measurement range: DC to 3 GHz
• Input A/B (BNC): DC to 200 MHz
• Input C (SMA): 100 MHz to 3 GHz
• Input impedance A/B: 50 Ω or 1 MΩ (switchable), sensitivity 25 mV
• Input impedance C: 50 Ω, sensitivity 30 mV
• 10-digit resolution (at 10 s gate time)
• Nine measurement functions, external GATE and ARMING connectors (BNC)
• External reference input/output (10 MHz) via BNC connector
• HM8123: TCXO (temperature stability: ±0.5 x 10-6), HM8123-X: OCXO (temperature stability: ±1.0 x 10-8)
• RS-232/USB dual interface, optionally IEEE-488 (GPIB)
• Fanless design

Key Facts

• Power measurement range: 50 μW to 12 kW
• Analog bandwidth: DC to 100 kHz
• Sampling rate: 500 ksample/s
• 16 bit resolution for current and voltage
• Basic accuracy: 0.05 %
• 26 different measurement and mathematical functions