Microstrip Kits for RF & Microwave Education & Research
Comprehensive microstrip training kits and microwave signal source solutions designed for hands-on learning, RF component characterization, and antenna experimentation. Ideal for engineering colleges, universities, and research laboratories.
Trusted by leading institutions across India IISc · IIT · BEL · DRDO · Manipal · M.S. Ramaiah · BMSCE · RVCE and many more..
Product Overview
Technilab Microstrip Kits are designed to provide practical exposure to RF and microwave circuit design, component characterization, and antenna analysis. From microwave signal sources to microstrip trainer kits, these systems help students and researchers understand microwave transmission, filtering, power division, coupling, and antenna performance through hands-on experimentation.
Designed for laboratory environments, every kit is manufactured for accuracy, repeatability, and long-term reliability.
Why Choose Our Microstrip Kits
Complete RF & Microwave Training Solutions
Industry-Standard Practical Experiments
OEM Manufactured for Reliable Performance
Technical & After-Sales Support
MICROWAVE SOURCE ( S BAND )

The Microwave Signal Source provides a stable RF output for the characterization and testing of microstrip components. It serves as the primary signal generator for laboratory experiments involving filters, couplers, power dividers, resonators, and other microwave circuits.
Specification
| Beam Supply | |
| Voltage Range | 200 – 450 V Continuously Variable |
| Current | 50mA Max |
| Regulation | Better Than 0.5% for ±10% variation in mains Supply Voltage |
| Ripple | Less than 5mV rms |
| Repeller Supply | |
| Voltage Range | -10V to -270V DC continuously Variable |
| Regulation | 0.25% for ±10% variation |
| Heater Supply | 6.3V DC (regulated) |
| Modulation | |
| Square Wave | Freq.: 500 Hz-2000Hz Max. Amp. + 110 Volt peak to peak Amplitude and frequency continuously variable |
| Sawtooth | Freq.: 50Hz – 150Hz Amplitude – 60 V Max: peak to peak Amplitude and frequency continuously variable |
| Operation Voltage | 230 V ± 10%, 50 Hz. A.C. |
MICROWAVE SOURCE ( L BAND )

Designed for L-Band microwave applications, this signal source delivers stable and reliable RF signals for component testing, laboratory experiments, and microwave system evaluation.
Specifications
| Operating Frequency | 100 Mhz to 8 Ghz |
| Operating range | +20dBm to -40dBm |
| Accuracy | ±1dBm |
| Modes of operation | Default and Relative (set zero) |
| Temperature | Room temperature to max 40°C |
| Humidity | Up to 90% max (No condensation) |
| Weight | Less than 1.5 Kg |
| Power requirement | 230V AC/ 50 Hz |
| Power Socket | 3 pin Socket |
| Signal connectors | SMA (F) type RF output |
| No calibration after powering on (plug-in and measure) |
MICROWAVE SOURCE ( C BAND )

The C-Band Microwave Signal Source enables accurate testing and characterization of microwave circuits and RF components across higher frequency applications used in advanced laboratory environments.
Specifications
| Operating Frequency | 100 Mhz to 8 Ghz |
| Operating range | +20dBm to -40dBm |
| Accuracy | ±1dBm |
| Modes of operation | Default and Relative (set zero) |
| Temperature | Room temperature to max 40°C |
| Humidity | Up to 90% max (No condensation) |
| Weight | Less than 1.5 Kg |
| Power requirement | 230V AC/ 50 Hz |
| Power Socket | 3 pin Socket |
| Signal connectors | SMA (F) type RF output |
| No calibration after powering on (plug-in and measure) |
MICROWAVE SIGNAL SOURCE Trainer Set (S Band : 2-3 GHz)
The Microstrip Components Kit includes a comprehensive range of RF and microwave components for practical study and characterization of transmission lines, filters, couplers, resonators, amplifiers, and power dividers. The package includes detailed instructional material, making it ideal for engineering laboratories and research applications.
The Following micro strips components are supplied
- Ring Resonator
- Power Divider – 2 way equal power division & 2 way unequal power division
- Branch line directional coupler
- Backward wave directional coupler
- Rat Race Hybrid Ring
- Low Pass filter & Hi Pass Filter
- Band Pass filter & Band stop filter
- Circulator
- Amplifier
- 50 Ohm Transmission Line
- Strip line Directional Coupler
The following accessories required for the characterization of components using either a Test set-up consisting of Microwave Signal Source, detector, power meter or a Network Analyzer Systems can also be Supplied.
- Signal Source – 1.9-3.300 GHz
- RF Power Meter range 100MHz – 8.0 Ghz &
- VSWR Meter
- Microwave Detector (0.1-4Ghz)
- RF Cable 30 cm length, 45 cm length & 1 meter length
- BNC Cable – premium
- Adapter SMA (F) to SMA (F)
- Attenuator pad 3db, 6db & 10 db
- Coaxial matched loads – 50 Ohms
Micro strip Antenna Trainer Kit-TLMS-01 Micro Strip Antenna Trainer Kit for Study of Radiation Pattern, Gain, Directivity etc of different types of Antenna.

The TLMS-01 Trainer Kit is designed for practical study of antenna radiation patterns, gain, directivity, and polarization characteristics. It enables students and researchers to perform comprehensive antenna measurement experiments using various antenna types.
- Radiation Pattern Measurement
- Gain & Directivity Measurement
- VSWR Measurement
- Reflection Coefficient Analysis
- Co-Polarization & Cross-Polarization Studies
- Array Antenna Frequency Scanning
- Patch, Yagi & Array Antenna Analysis
Specifications
| Operating Frequency | 100 Mhz to 8 Ghz |
| Operating range | +20dBm to -40dBm |
| Accuracy | ±1dBm |
| Modes of operation | Default and Relative (set zero) |
| Temperature | Room temperature to max 40°C |
| Humidity | Up to 90% max (No condensation) |
| Weight | Less than 1.5 Kg |
| Power requirement | 230V AC/ 50 Hz |
| Power Socket | 3 pin Socket |
| Signal connectors | SMA (F) type RF output |
| No calibration after powering on (plug-in and measure) |
Micro strip Antenna Trainer Kit TLMS-02 Micro Strip Antenna Trainer Kit for Study of Radiation Pattern, Gain, Directivity etc

The TLMS-02 Trainer Kit focuses on the characterization of microstrip microwave components, enabling practical analysis of resonators, power dividers, couplers, and transmission structures.
- Ring Resonator Characterization
- Effective Dielectric Constant Measurement
- Resonance Frequency Measurement
- Power Divider Performance
- Isolation Measurement
- Coupling Measurement
- Insertion Loss Analysis
- Directivity Measurement
Specifications
| Sl.No | Microwave Signal Source – VCO Based | QTY |
|---|---|---|
| 1 | Microwave Signal Source – VCO Based | 1 |
| 2 | R F Power Meter | 1 |
| 3 | Micro strip Resonator | 1 |
| 4 | Micro Strip Power Divider | 1 |
| 5 | Micro strip Branch line coupler | 1 |
| 6 | Micro strip Paraller line coupler | 1 |
| 7 | RF Detector | 1 |
| 8 | SMA Matched Termination | 100 |
| 9 | SMA – BNC Cable | 1 |
| 10 | SMA – SMA RF Cable (RG 188) – 1 meter | 100 |
| 11 | SMA – SMA RF Cable Short Length | 1 |
| 12 | 6 dB Attenuator | 2 |
Frequently Asked question
What are Microstrip Kits used for?
Microstrip Kits are used to study RF and microwave circuit design, antenna characteristics, signal transmission, and component performance through practical laboratory experiments.
Who are these kits designed for?
They are ideal for engineering colleges, universities, research laboratories, RF training centres, and organisations involved in microwave engineering education.
Which experiments can be performed?
Depending on the selected kit, users can perform experiments on filters, couplers, resonators, power dividers, antenna radiation patterns, gain, directivity, VSWR, dielectric constant, and microwave signal characterization.
Do the kits include instructional material?
Yes. Each Microstrip Kit includes detailed instruction manuals to support practical laboratory learning and experimentation.
Can the kits be customised?
Yes. Technilab offers customised configurations based on laboratory requirements, curriculum, and research applications.
Do you provide technical support?
Yes. Our team provides installation guidance, technical assistance, and dependable after-sales support for all RF and microwave laboratory solutions.
Looking for Advanced Microstrip Training Solutions?
Whether you’re establishing a new RF laboratory, expanding your microwave curriculum, or setting up an antenna measurement facility, Technilab offers reliable microstrip training solutions backed by over 20 years of engineering expertise.

Technilab Instrument is a reputed organisation engaged in design, manufacture ,distribute and service provider of Test and Measuring Instruments and RF and microwave components. The company is managed by a team of experienced engineers having vast experience in Instrumentation, Sales and support.