Signal and Spectrum analyzer
Advanced/High End Test Application
FSW SIGNAL AND SPECTRUM ANALYZER
- Frequency range from 2 Hz to 8/13.6/26.5/43.5/50/67/85/90 GHz (with external harmonic mixers from Rohde & Schwarz up to 500 GHz)
- Low phase noise of –137 dBc (1 Hz) at 10 kHz offset (1 GHz carrier)
- –88 dBc dynamic range (with noise cancellation) for WCDMA ACLR measurements
- Up to 5 GHz analysis bandwidth
- 0.4 dB total measurement uncertainty up to 8 GHz
- Real-time analysis up to 512 MHz bandwidth
- High-resolution 12.1″ (31 cm) touchscreen for convenient operation
- Multiple measurement applications can be run and displayed in parallel
FSWP PHASE NOISE ANALYZER AND VCO TESTER
- Frequency range from 1 MHz to 8/26.5/50 GHz
- High sensitivity for phase noise measurements thanks to cross correlation and extremely low noise internal reference sources
- typ. –172 dBc (1 Hz) at 1 GHz carrier frequency and 10 kHz offset
- typ. –158 dBc (1 Hz) at 10 GHz carrier frequency and 10 kHz offset
- Simultaneous measurement of amplitude noise and phase noise
- Measurement of phase noise on pulsed sources at the push of a button
- Internal source for measuring additive phase noise, including on pulsed signals
- Signal and spectrum analyzer and phase noise analyzer in a single box
FSMR MEASURING RECEIVER
- Frequency range from 20 Hz to 3/26.5/43/50 GHz
- Highly accurate level calibrator with wide measurement range from +30 dBm to –140 dBm
- Highly accurate level calibrator
- Modulation analyzer
- Audio analyzer with THD and SINAD measurement functionality
- Power meter for connection of R&S®NRP-Zxx power sensors
- High-performance spectrum analyzer
General/Test Application
FSVR REAL-TIME SPECTRUM ANALYZER
- Frequency range from 10 Hz to 7 GHz, 13.6 GHz, 30 GHz or 40 GHz
- 40 MHz real-time analysis bandwidth
- Spectrum with persistence function
- Spectrogram display
- Display of power versus time
- Triggering on frequency masks
- Measurement applications for cellular standards, wireless connectivity standards and general purpose, e.g. phase noise, noise figure, vector signal analysis, etc.
- Frequency range up to 110 GHz with the R&S®FSVR30 or R&S®FSVR40, the R&S®FSV-B21 option and the R&S®FS-Z60/-Z75/-Z90/-Z110 harmonics mixers
FSVA SIGNAL AND SPECTRUM ANALYZE
- Frequency range up to 4/7/13.6/30/40 GHz
- Up to 160 MHz signal analysis bandwidth
- Convenient, intuitive operation with touchscreen based user interface
- 0.4 dB level measurement uncertainty up to 7 GHz
- Low displayed average noise level (DANL) (e.g. typ. –168 dBm (1 Hz) for the R&S®FSVA)
- High third-order intercept (TOI) (e.g. typ. 20 dBm for the R&S®FSVA)
- Very low phase noise (e.g. typ. –118 dBc (1 Hz) at 1 GHz and 10 kHz offset for the R&S®FSVA)
- General-purpose measurement applications for phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics
- Wireless measurement applications for LTE (including LTE-Advanced), WLAN (including IEEE 802.11ac), WCDMA/HSPA+, TD-SCDMA, GSM/EDGE, CDMA2000®/1xEV-DO, Bluetooth®
- Frequency range up to 500 GHz with harmonics mixers
- Keeping test data confidential with removable solid state or hard disk drives
FSV SIGNAL AND SPECTRUM ANALYZER
- Frequency range up to 4/7/13.6/30/40 GHz
- Up to 160 MHz signal analysis bandwidth
- Convenient, intuitive operation with touchscreen based user interface 5 GHz
- 0.4 dB level measurement uncertainty up to 7 GHz
- –110 dBc (1 Hz) phase noise at 10 kHz frequency offset
- +15 dBm third-order intercept (TOI)
- Displayed average noise level (DANL) in 1 Hz bandwidth: –155 dBm at 1 GHz, –147 dBm at 30 GHz; with R&S®FSV-B24 preamplifier: –162 dBm at 30 GHz
- General-purpose measurement applications for phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics
- Wireless measurement applications for LTE (including LTE-Advanced), WLAN (including IEEE 802.11ac), WCDMA/HSPA+, TD-SCDMA, GSM/EDGE, CDMA2000®/1xEV-DO, Bluetooth®
- Frequency range up to 500 GHz with harmonics mixers
- Keeping test data confidential with removable solid state or hard disk drives
FPS SIGNAL AND SPECTRUM ANALYZER
- Frequency range from 10 Hz to 7 GHz, 13.6 GHz, 30 GHz or 40 GHz
- 40 MHz real-time analysis bandwidth
- Spectrum with persistence function
- Spectrogram display
- Display of power versus time
- Triggering on frequency masks
- Measurement applications for cellular standards, wireless connectivity standards and general purpose, e.g. phase noise, noise figure, vector signal analysis, etc.
- Frequency range up to 110 GHz with the R&S®FSVR30 or R&S®FSVR40, the R&S®FSV-B21 option and the R&S®FS-Z60/-Z75/-Z90/-Z110 harmonics mixers
FPL1000 SPECTRUM ANALYZER
- Frequency range up to 4/7/13.6/30/40 GHz
- Up to 160 MHz signal analysis bandwidth
- Convenient, intuitive operation with touchscreen based user interface
- 0.4 dB level measurement uncertainty up to 7 GHz
- Low displayed average noise level (DANL) (e.g. typ. –168 dBm (1 Hz) for the R&S®FSVA)
- High third-order intercept (TOI) (e.g. typ. 20 dBm for the R&S®FSVA)
- Very low phase noise (e.g. typ. –118 dBc (1 Hz) at 1 GHz and 10 kHz offset for the R&S®FSVA)
- General-purpose measurement applications for phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics
- Wireless measurement applications for LTE (including LTE-Advanced), WLAN (including IEEE 802.11ac), WCDMA/HSPA+, TD-SCDMA, GSM/EDGE, CDMA2000®/1xEV-DO, Bluetooth®
- Frequency range up to 500 GHz with harmonics mixers
- Keeping test data confidential with removable solid state or hard disk drives
FSL SPECTRUM ANALYZER
- Frequency range up to 4/7/13.6/30/40 GHz
- Up to 160 MHz signal analysis bandwidth
- Convenient, intuitive operation with touchscreen based user interface 5 GHz
- 0.4 dB level measurement uncertainty up to 7 GHz
- –110 dBc (1 Hz) phase noise at 10 kHz frequency offset
- +15 dBm third-order intercept (TOI)
- Displayed average noise level (DANL) in 1 Hz bandwidth: –155 dBm at 1 GHz, –147 dBm at 30 GHz; with R&S®FSV-B24 preamplifier: –162 dBm at 30 GHz
- General-purpose measurement applications for phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics
- Wireless measurement applications for LTE (including LTE-Advanced), WLAN (including IEEE 802.11ac), WCDMA/HSPA+, TD-SCDMA, GSM/EDGE, CDMA2000®/1xEV-DO, Bluetooth®
- Frequency range up to 500 GHz with harmonics mixers
- Keeping test data confidential with removable solid state or hard disk drives
FPS SIGNAL AND SPECTRUM ANALYZER
Experience high performance wherever you take it
- Frequency range 9 kHz to 3 GHz or 6 GHz
- Resolution bandwidths 10 Hz to 3 MHz
- High sensitivity (< –141 dBm (1 Hz), with optional preamplifier < –161 dBm (1 Hz ))
- High third order intercept (> 10 dBm, typ. 15 dBm)
- Low measurement uncertainty (< 1 dB)
- Internal tracking generator (model .13/.16)
- Compact dimensions
- Low power consumption (12 W)
FPL1000 SPECTRUM ANALYZER
- RF performance engineered in Germany
- 10.1″ WXGA (1366 × 768 pixel) display
- Frequency range from 5 kHz to 1 GHz, upgradable to 2 Ghz or 3 GHz with keycode
- Resolution bandwidth settings down to 1 Hz
- Wi-Fi-enabled, supported by included remote control and measurement software
- Three-year standard warranty
HandHeld Models
CABLE RIDER ZPH CABLE & ANTENNA ANALYZER
- Frequency range from 2 MHz to 3 GHz/4 GHz, upgrade via keycode
- DTF, return loss, VSWR and one-port cable loss measurements
- Ideal for field use: 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)
- Large color touchscreen
- Measurement wizard to speed up measurements and eliminate human errors
- Easy and cost-efficient upgrades of all options via software keycode
ZVH CABLE AND ANTENNA ANALYZER
- Frequency range from 100 kHz to 3.6 GHz or 8 GHz
- 100 dB (typ.) dynamic range for filter and antenna isolation measurements
- Factory calibration over entire frequency range
- uilt-in DC voltage supply (bias) for active components such as amplifiers
- Power meter option
- Saving of measurement results on SD memory card or USB memory stick
- Easy operation with user-configurable test sequences (wizard)
- Easy-to-replace Lithium-ion battery for up to 4.5 h of operation
- Rugged, splash-proof housing for rough work in the field
- Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys
FSH HANDHELD SPECTRUM ANALYZER
- Frequency range from 9 kHz to 3.6/8/13.6/20 GHz
- High sensitivity (< –141 dBm (1 Hz), with preamplifier < –161 dBm (1 Hz))
- 20 MHz demodulation bandwidth for analyzing LTE signals
- Low measurement uncertainty (< 1 dB)
- Measurement functions for all important measurement tasks related to the startup and maintenance of transmitter systems
- Internal tracking generator and VSWR bridge with built-in DC voltage supply (bias)
- Two-port network analyzer
- Rugged, splash-proof housing for rough work in the field
- Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys
- Easy operation thanks to user configurable, automatic test sequences (wizard)
SPECTRUM RIDER FPH HANDHELD SPECTRUM ANALYZER
- Frequency ranges from 5 kHz to 2/3/4 GHz; upgrade via keycode
- Solid RF performance
- Ideal for field use: 8 hour battery life, 2.5 kg (5.5 lb) weight, backlit keypad, fast boot time, nonreflective display, small footprint, ruggedized housing
- Large color display with touch and gesture operation
- Measurement wizard that supports measurement campaigns speeds up measurements and avoids errors
- Features and options for various industries such as aerospace and defense, wireless communications, broadcasting, spectrum regulators and education
- Easy and cost-efficient upgrades of all options via software keycode
- Three-year warranty as standard (battery one year)

Technilab Instrument is a reputed organisation engaged in design, manufacture ,distribute and service provider of Test and Measuring Instruments and RF and microwave components. The company is managed by a team of experienced engineers having vast experience in Instrumentation, Sales and support.